What accessories can I choose for my Kit?

The Swytch kit comes with everything you need to convert your bike into a power-assisted E-Bike. For further information on what comes with the kit, please click here > What comes with the kit?

All accessories from previous Swytch generations are compatible with the Swytch GO as well.
There are a variety of accessories available for purchase if you wish to add to your Swytch kit. 

You can purchase any accessories at the Order Portal prior to the lock date or alternatively, you can purchase individual accessories and extra batteries in our online store: https://www.swytchbike.com/shop/


Extra Power Pack


You can purchase extra Power Packs if you require a longer range.



Mounting-Position Adapters

Group 34660.png


Includes the necessary hardware and cable extensions to re-position the Power Pack on your seat post or downtube.


Twist & Thumb throttle 

Group 34661.png

Twist and thumb throttles can be used on the Swytch kit as an add-on. It allows you to 'gun' the power without pedalling, like a motorbike, twisting or pushing the throttle to apply power. Without it, the kit is purely a pedal-assist system. In some regions, such as the UK, these should be used off-road or within private land, as they are not road-legal and as such, we always advise you to check your country's regulations. 


LED Display

Group 34661.png

This LED display allows you to track your speed and the battery level to unlock extra power, as well as unlock extra power modes and turn the power off while riding if needed.


OLED Display

Group 34661.png

This LCD display brings you all the standard LED display features as well as information on the distance you travelled. Plus you will be able to configure the maximum speed (refer to local laws) and wheel size when swapping the wheel between bikes.


Bro Block


Group 34409.png

The Bro Block, fits the luggage mount of your Brompton, allowing you to place your Power Pack lower down to give a more balanced riding experience and seamless fold.


Brake sensors 

Group 34660.png

When installed, the brake sensors will make the kit cut power to the motor wheel as soon as you stop peddling. Brake sensors are not required to use the kit safely. They are recommended for use with a throttle accessory and are also handy for adventure cyclists, or if you often find yourself in slow-moving traffic. There are two types of brake sensors available inline and hydraulic, depending on which brakes you have.


Premium toolkit 

The 20 pcs set comes in a professional hard case and includes:

  • 3x Tyre Levers
  • 5-Part Tube Repair Kit
  • 3x Multi-Spanners
  • 1x Chain Whip
  • 1x Crank Arm Remover
  • 1x Crank Tool
  • 1x Multi-size Spoke Wrench
  • 1x Bottom Bracket Remover
  • 1x Freewheel Remover
  • 1x Cross-Head Screwdriver
  • 1x Allen Key Set
  • 1x Long Arm Allen Key/Hex wrench (for pedal arm caps)

Torque Arm 

Our kit can fit most bikes without putting high levels of strain on the forks. However, for bikes with old forks (30+ years), carbon forks, or narrow forks such as the Brompton, we do offer torque arms which are available to purchase in the Order Portal. These add strength to your forks. 


Motor/PAS/accessory extension cables

For some unusual bike setups, you may require extension cables to ensure each of the kit's components can connect to the bracket/Power Pack. Our extra extension cables have the following length:





How to order?

You can easily purchase any accessories via the Order Portal or, alternatively, if you are based in the UK you can purchase them via our Webshop.

If you are based everywhere else simply get in touch with our support team who will be able to assist you.


Register Now

To be the first to know our next stock drop is live, don't forget to register to our waitlist here: https://www.swytchbike.com/ 

Was this article helpful?
78 out of 159 found this helpful