Which Pedal Assist System should I pick in the GO Order Portal?

There are three pedal assist system options (PAS) in the GO Order Portal, and each one suits different bikes. Here is the detail of each type and some example setups they will suit:


1. Standard Pedal Sensor








This disc fits the majority of pedal setups. It's designed to connect between the bottom bracket and the crank arm, leaving ample room to fit the sensor. You will only struggle to fit this disc if the crank arm and bottom bracket are connected very closely.


2. Universal Pedal Sensor



If you don't have enough room between the bottom bracket and the crank, so can't fit the Standard Pedal Sensor disc, then you will need the Universal Pedal Sensor. It connects to your crank arm and lets you mount the disc further back, creating space for the sensor to measure your pedalling accurately. This ensures seamless regardless of your bike design.


3. Integrated Pedal Sensor

The integrated Pedal Sensor is designed for specific bottom bracket types with 22 splines or a Shimano fitting. To find out if you require this, you'll need to remove your crank arm and make sure you have the correct type of bottom bracket, like the one shown here:



image (176)1.pngIntegrated_Pedal_Sensor_Fitting_Final.png


Still Not Sure? Contact Us

If you aren’t sure which Pedal Sensor option to select, no worries, we are here for you!

Open a support ticket making sure to include images of your crank setup. Our technical team will then identify the best PAS option for your needs.

Was this article helpful?
21 out of 33 found this helpful